Product ID:EUTROLOY 16730
MSDS Date:09/07/1995
FSC:3439
NIIN:00N071113
MSDS Number: CDWSD

EUTECTIC CORP

1515 BROOK DR
DOWNERS GROVE, IL 60515
US

Emergency Phone: 800-323-4845

Info Phone: 708-932-1210

Cage: 72271

EUTECTIC CORPORATION

DOWNERS GROVE, IL 60515 US

Telephone: 800-323-4845

Cage: 5N977

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

FORM FROM INGS LISTED. DECOMP PRODS OF

RTECS: 9999999ZZ

OXIDATION OF MATLS SHOWN IN INGS SECTION, PLUS THOSE

RTECS: 9999999ZZ

REASONABLY EXPECTED CONSTITUANTS OF FUME MAY INCLUDE

RTECS: 9999999ZZ

COATINGS MAY PRDCE FLUORIDE CMPDS, METAL OXIDES,

RTECS: 9999999ZZ

MONOXIDE & DIOXIDE, NITROGEN OXIDES, & CERTAIN INERT

RTECS: 9999999ZZ

DETERMINE COMPOSITION & QTY OF FUMES & GASES TO

RTECS: 9999999ZZ

WORKER'S HELMET IF WORN/IN WELDER'S BRTHG ZONE.

RTECS: 9999999ZZ

THESE FUMES. SHORT TERM OVEREXP MAY RSLT

RTECS: 9999999ZZ

EXCESS OVEREXP MAY CAUSE BRONCH ASTHMA, LUNG

RTECS: 9999999ZZ

METAL FUME FEVER CAN BE CAUSED BY INHAL OF CERTAIN

RTECS: 9999999ZZ

SOLDERING/CUTTING OPERATIONS. SYMPS ARE SIMILAR TO

RTECS: 9999999ZZ

MUSCLE ACHE, TIGHTNESS IN CHEST, DRYNESS OF NOSE &

RTECS: 9999999ZZ

W/IN SEVERAL HRS AFTER OVEREXP & MAY LAST 8-24 HRS.

RTECS: 9999999ZZ

NON-TOX & CHEM NON-IRRIT. SKIN CONT HAS SHOWN NO

RTECS: 9999999ZZ

CAN PRDCE PARTICULATE IRRIT. DOES NOT SEEM TO BE

RTECS: 9999999ZZ

MILD PULM RXN & POSS NON-IRRIT SLIGHT FIBROSIS OF

RTECS: 9999999ZZ

OF RESP TRACT IF INHALED. LONG TERM OVEREXP MAY

RTECS: 9999999ZZ

LUNGS WILL CLEAR IN TIME WHEN EXPOSURE CEASES.

RTECS: 9999999ZZ

FILTER LENS. PROVIDE PROT SCREENS & FLASH GOGG IF

RTECS: 9999999ZZ

IS TOO DARK TO SEE WELD ZONE THEN GO TO NEXT

RTECS: 9999999ZZ

SPKS & ELEC SHOCK. AT MIN, THIS INCL

RTECS: 9999999ZZ

APRONS, HATS AS WELL AS DARK PROT CLTHG.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: FUMES ASSOC W/HEATING,
WELDING, BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO HLTH
& OVEREXP CAN CAUSE LUNG DMG &/OTHER ORGAN DMG. EYE/SKIN: ARC RAYS
& ULTRAVIOLET LIGHT CAN INJU RE EYES & BURN SKIN. LIQS USED IN
FLUXES & CHEMS MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC SHOCK CAN
KILL. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: INGEST: DANGER! MAY BE HARMFUL/FATAL
IF SWALLOWED. GEN WELDING FUMES: ELEC ARC WELDING, BRAZING,
SOLDERING/THERMAL SPRAYING MAY CREATE ONE/MORE OF THE FOLLOWING
HLTH HAZ. FUMES, GASES & DUST S CAN BE DANGEROUS TO YOUR HLTH.
CERTAIN MED STUDIES HAVE SUGGESTED LUNG DMG CAN RSLT FROM OVEREXP
TO (ING 9)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL: MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE
OF INGREDIENTS. SKIN: THOROUGHLY WASH HANDS/AFFECTED AREAS W/SOAP &
WATER TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD.
EYES: TH OROUGHLY FLUSH W/WATER FOR AT LEAST 15 MINUTES TO REMOVE
ALL RESIDUE. OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEMICAL AIDS.
ADVISE MD OF INGS. INGEST: CALL MD &/LOCAL POISON CTL CTR. ADVISE
OF INGS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:GEN NON-FLAM WELDING ARC SPKS & FLAMES
CAN IGNITE COMBUST & FLAMS. METAL POWDER DUST MAY PRESENT
FIRE/EXPLO HAZ UNDER FAVORABLE CNDTNS OF PARTICLE SIZE(SUP DAT)

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PLEASE READ AND UNDERSTAND THE PRODUCT
LABEL INFORMATION FOR PROPER PROCEDURES AND USE.
Other Precautions:SEE ANSI Z49.1 "SFTY IN WELDING & CUTTING" & CHAPTER
II OF "THERMAL SPRAYING" PUBLISHED BY AMERICAN WELDING SOCIETY &
OSHA PUBLICATION 2206 (29 CFR 1910) FOR MORE DETAIL. TRAIN WELDER
TO KEEP HIS/HER FACE AWAY FROM FUME/DUST PLUME.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUSTS FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:WEAR HELMET/USE FSHLD W/APPROP (ING 20)
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR HAND, HEAD & BODY PROT WHICH HELP PVNT INJURY FROM RADIA, (ING
22)
Work Hygienic Practices:TRAIN WORKERS NOT TO TOUCH LIVE ELEC PARTS & TO
INSULATE THEMSELVES FROM WORK & ELEC GROUND.
Supplemental Safety and Health
EXPLO HAZ:DISPERSION & STRONG IGNIT SOURCE. WHEN PREPARING WORKPLACE
W/FLAM CHEM AID, KEEP ALL WELDING SOURCES, SPKS & FLAMES AT LEAST
20 FEET FROM WORKPLACE UNTIL FLAM EVAPS. TOX FUMES MAY BE PRDCED.
SOME FUMES & CHEM AIDS MAY GIVE OFF HYDROGEN CHLORIDE, PHOSGENE &
CHLORINE GAS. CANS, UNDER PRESS, & FLAMM MAY EXPLODE.

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DURING WELDING, THERMAL SPRAYING &
ALLIED PROCESSES, FUME & GAS DECOMP PRODS GENERATED ARE DIFFERENT
IN PERCENT &(ING 2)

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS,
GRINDING/FILLER RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER IN
ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS. USE APPROP
MEASURES TO KEEP AIRBORNE DUST LEV ELS CONTAINED I/A/W EXPOS LEVELS
IN INGS SECTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.